V Hull Cuddy Cabin Boat Covers (Trailerable)
These are made using our own top quality 600D “Ocean Pride” polyester material.
They are best suited to boats with Bow Rails. You may find our “runabout” covers are better if you do not have rails.
You have a FIVE YEAR guarantee against serious material deterioration including the stitching on the seams.
The material is 100% waterproof and has a sprayed on inner, smooth liner so scratching/abrasion does not occur on your boat.
Each cover has the following specifications:
Normally available in a choice of Navy Blue or Black.
A five year guarantee against serious material deterioration including the stitching on the seams of the cover.
Plenty of straps which are adjustable for tight fitting to your trailer bars
Breather air vents to avoid sweating and condensation.
Re enforced at the bow and both rear corners.
Measure from the point where the BOW RAILS themselves join.
Run the tape tightly over the screen to the back of the boat.
If you have an outboard motor you can come over the top over the motor and down to the bottom of the cowling cover (Do this with the motor in the stored position)
When you have that measurement ADD ON 0.75m (This is for the drop from the bow rails).
Select the cover of the closest length.
As a guide only you will normally need a cover length of 1.00m – 1.50m longer than the length of your boat.
The width is the width of material. Remember this will be more than the straight width of the boat as it has to be taken over the hard top etc.They are made to give good coverage down the side of your boat as well as a good shape..
Select the size which is the nearest one above the size you have measured.
Customers are encouraged to call and ask any questions. You will get a friendly and helpful response.
Black, Navy Blue
5.64m x 3.55m, 6.21m x 3.53m, 6.53m x 3.75m, 6.85m x 4.00m, 7.25m x 4.00m, 7.56m x 4.00m, 8.25m x 4.20m, 8.60m x 4.30m